According to an article by the National Institute of Health (NIH), Aztec legend suggests that Montezuma plotted his “revenge” post-mortem, against all tourists or invaders in his region, by gifting them with near-fatal diarrhea.



Learning Montezuma’s Revenge from a single demonstration | OpenAI

REINFORCEMENT LEARKING EXAMPLE

 

 Accessory Dwelling Units (ADUs) gained significant popularity between 2020 and 2025, especially in California and San Diego. Multiple factors contributed to this growth. Regulatory changes, including state laws such as AB 68 and AB 881, reduced zoning restrictions and streamlined permitting processes. These legal shifts made it easier for homeowners to add secondary units to their properties.

San Diego County data shows a large increase in ADU activity. Permits rose from 1,150 in 2020 to 3,991 in 2024, a 247 percent increase. Completed ADU units grew by 480 percent during the same period. This reflects strong local adoption driven by housing shortages and new incentive programs, including the ADU Bonus Program.

Reports covering national and global markets confirm the trend. One study values the ADU market at 3.3 billion dollars in 2023, projecting growth to 10.6 billion by 2030. Another report places the global ADU market at 18 billion dollars in 2024, with an expected rise to 43.35 billion by 2034. Industry publications describe ADUs as a growing solution for multigenerational living, rental income, and flexible housing needs.

Between 2020 and 2025, ADUs transitioned from a niche concept to a mainstream housing strategy, supported by policy changes, economic pressures, and increasing demand for adaptable residential space.

 Yes — you can reach $900k/year, but not at the beginning.

With the path you’re starting from (a $5k startup, small projects, new license), hitting $900k/year is absolutely possible, but it requires scaling steps, not day-one results.

Below is the most realistic breakdown.

---

✅ What’s Absolutely Achievable

Many small contractors start solo and grow to $750k–$1.5M revenue within 3–6 years if they scale correctly.

Fence companies, millwork shops, and small GC operations routinely hit these numbers once they add staff and take commercial jobs.

You’re in a trade where revenue scales FAST once you grow capacity.

---

✅ Year-by-Year Realistic Growth Path to $900k

📌 Year 1 — Survival & Learning

• Revenue: $80k–$180k

• Work type: residential fences, small carpentry, small TI

• You’re mostly solo

• Money goes back into tools, truck, insurance
  👉 Focus: cash flow + reputation

---

📌 Year 2 — Expansion

• Revenue: $180k–$350k

• Bring a helper or part-time worker

• Better insurance, more tools

• Start bidding small commercial or HOA work
  👉 Focus: systems + repeat clients

---

📌 Year 3 — Company

• Revenue: $350k–$600k

• 2–3 workers

• Larger jobs ($25k–$75k range)

• Consider renting a small shop if doing millwork
  👉 Focus: become reliable + fast

---

📌 Year 4–5 — Serious Contractor

• Revenue: $600k–$1.2M

• 4–6 workers + subs

• Capable of 2–3 projects at once

• Commercial jobs ($80k–$250k each)
  👉 This is when $900k/year is realistic.

---

🧠 Why $900k/year is realistic in your trade

👉 Fencing example

A 3-man crew can complete about $12k–$18k per week of fencing.
Over 45 working weeks = $540k–$810k per crew.

👉 Millwork / TI example

One commercial millwork contract can easily be $150k–$700k.
Two medium-sized commercial jobs = $300k–$600k alone.

You only need:

• One strong crew

• One commercial client

• Consistent bidding

To hit $900k/year.

---

⚠️ Reality Check

To reach $900k/year you must eventually pay for:

• Shop space (if doing millwork)

• Employees

• Higher insurance

• Vehicles

• Tools

• Working capital

You can start with $5k,
but you won’t reach $900k/year with only $5k.
You reach it by reinvesting profits in years 1–3.

---

⭐ Final Answer

Yes — $900k/year is realistic and very achievable
…but it will take:

• 3–5 years

• Scaling your crew

• Taking on commercial or high-volume work

• Reinvesting early profits

If you want, I can build you a full roadmap showing:

• What tools to buy

• What jobs to target

• What insurance to upgrade when

• How many workers you need

• How revenue grows each year

 Analisis the contratista

McKeever | El Cajon CA | Read Reviews + Get a Free Estimate | BuildZoom

 

 Research McKeever Documents: like past resume's past applications, past positions opened. (Research for information in career background)

Important.

 TODO TASKS AFTER COMPLETING GOLDEN 1



- TAXES


- CHECK ON FAFSA


- CHECK ON ASU CALSSES


- DO THE HOMEWORK ( CHECK DEADLINES )

- SEND EMAIL TO PROFFESSORS


- PAY CAPITAL ONE  ( IMPORTANT )


- PAY BBVA 

 

 

 

RADD

1. Empira Black 501 2cm *Confirmed

2. Empira White 5151 2cm *Confirmed

3. Tambour Wood Panels Profile: White Oak 655

4. Premium P-Lam Landmark Wood 7981-38 *Confirmed

5. P-Lam Tatami Nexumi p-124 CA “Finish TBD” *Confirmed 

6. P-Lam North Sea D90-60 Matte Finish *Confirmed 

7. P-Lam p-124 CA : credenza style lower cabinet with vented doors

8. P-Lam Linen D427-60 Finish Matte straight edge with 1’-½” Apron *Confirmed

9. Texture Panel Smooth FRP Color White

10. Accent Base Style Millwork Reveal Base Color TBD 4” High *Confirmed

Manufacturer

Arborite 7, 5
Marlite 9
Fry Reglet 10
Caesarstone 1, 2
Surfacingsolution 3
Willsonart 8, 6, 4
















CAMPANILE:

Plastic Laminates (PL)

1. PL01 – White Laminate, Wilsonart Snow White Velvet  *Confirmed 

2. PL02 – Black Laminate, Fenix Nero *Confirmed

3. PL03 – Teal Laminate, Fenix Blu *Confirmed

4. PL04 – Wood-Look Laminate, Formica Aged Ash *Confirmed

5. PL05 – Thermofoil Units (unspecified) *Confirmed -alternative fandeck

6. PL06 – Thermofoil Units (unspecified) *Confirmed -alternative fandeck

7. PL07 – Elevator Cab Laminate (custom, printed design) *Confirmed

8. PL09 – Accent Laminate, Fenix Rossio *Confirmed

Wood Bases (WB) 

9. WB01 – Painted MDF Wood Base *Confirmed

10. WB02 – White Oak Veneer Wood Base *Confirmed

Wood Veneer / Panels (WD)

11. WD01 – White Oak Veneer, millworker sample (unspecified)

12. WD02 – Black Paneling, Terramai Faux Sugi Ban 

13. WD03 – Textured Veneer Panel Wire Brushed White Oak *Confirmed

Upholstery (UP)

14. UP01 – Lobby Upholstery, Kvadrat Raas

15. UP02 – Green Woolish, Designtex Field 502

16. UP03 – Yellow Woolish, Designtex Wheat 201

17. UP04 – Blue Woolish, Designtex Pool 404

18. UP05 – Purple Woolish, Designtex Deft 408

19. UP06 – Red Woolish, Designtex Beet 303

20. UP07 – We Study Wool Check, Maharam Iris 005

21. UP09 – Speakeasy Upholstery, Designtex Tour Cruise

Manufacturer

Fenix: PL02, PL03, PL09

Formica: PL04

Elevator Cab Manufacturer: PL07

Unspecified / Custom Millwork: PL05, PL06, WD01

Terramaii: WD02

Surfacing Solutions: WD03

Kvadrat: UP01

Designtex: UP02, UP03, UP04, UP05, UP06, UP09

Maharam: UP07

Tarkett : RB01
UP01 (Upholstery) – Kvadrat
WD01 (Wood Veneer) – Frost Hardwood Lumber Company
PL05 (Plastic Laminate) – (Local Supplier - if desired)
SSI North America: Pentadecor 3D Laminates PL06 (Plastic Laminate)

IN-SHOP: WB01, WB02,

NOTES: Research hinges, pull bars etc..

ACCESS & ALL HARDWARE:


RADD:

RADD – Complete Hardware Sample List

1. Pull Bar

2. Full Extension Slides

3. Line Bore Interiors

4. Grommet

5. Integral Toe

6. DW Panel Ready

7. Support, Metal Inwall

8. Support, Metal

9. Logos, Trash / Recycle

10. Cut Out, Sink

11. Cut Out, Sink Polished Edge

12. Fry Reglet

13. Die Wall

14. Rib with Wire Chase

15. Metal Inwall

16. Sub Top

17. Adjustable Shelf

18. Concealed Hinges (Soft-Close)

19. Shelf Pins (Finish Selection)

20. Trash / Recycle Pull-Out Hardware System (mechanism + bin)

21. Door / Drawer Bumpers .
    
    
    
    
    
    
    1. PULL BAR ( research status ) large to small: Suggested specs:
    Clean Style: Cylinder and Rectangular
    
    

CYL
- 560 x 25 mm 

Amerock - Bar Pull, Steel - Häfele

https://www.hafele.com/us/en/product/amerock-bar-pull-steel/13353048/?MasterSKU=P-00854124#&SearchParameter=%26Category%3DEjAKAOsFR_wAAAF.Q83iJvmA%26checkbox_fs_facet_handles_knobs_product_type%3DBar%2BPulls%26%40P.FF.followSearch%3D9980&PageNumber=1&ProductListSize=34&PageSize=48



REC
- 18 in L   









Ravinte 20 Pack 18 Inch Kitchen Square Cabinet Handles Matte Black Pulls Black Drawer Pulls Kitchen Cabinet Hardware Handles - Amazon.com

https://www.amazon.com/Ravinte-Kitchen-Cabinet-Handles-Hardware/dp/B09TF3DDNK/ref=sr_1_5?crid=2B2Z0XVT0DDT5&dib=eyJ2IjoiMSJ9.GdrXdSzyaTpVOLD1LNyTKdIwB6RBKFybCX4Uw5qGRcGvEEdbKrATrVzll01oWID30NCUXK7Yu4cSnt9RTVtLTHzqFqlSnLbNH1KCRL931KM42WZ_ep9MekPkvWgsN2j39cVnnXPF74DAC3Qs-Q4U4NAoN4Em4ky-4fyPDxKMqmjia-AxmKf-jPvTNun_oe6EWcB-qiO71pxYVnXSJSn4evA1w1GqUhWPFtuSE66V2p5-lgbbN-YQXtpnd352YWXh7sH6qqW_3Hq7AIq4SdoCOQP7emBFeDGER5jr5JUD190.rl0qTqMz-2W9HXb7lj8qULTNM0f6vEnBf89DObaR19I&dib_tag=se&keywords=square%2Bpull%2Bbar%2Bblack%2B20%22&qid=1762795144&s=hi&sprefix=square%2Bpull%2Bbar%2Bblack%2B20%2B%2Ctools%2C155&sr=1-5&th=1










2. Full Extension Slides  ( research status )  possible style RELIABILT 18-in Full extension Side Mount Ball bearing 100-lb Load Capacity Heavy Duty Silver Drawer Slide 1 -Pair 2 -Pieces 

RELIABILT 18-in Full Extension Side Mount Ball Bearing 100-lb Load Capacity Heavy Duty Silver Drawer Slide 1-Pair (2-Pieces) D80618W-ZP-W at Lowes.com
https://www.lowes.com/pd/RELIABILT-18-in-Full-Extension-Side-Mount-Ball-Bearing-Drawer-Slides/5014522869?store=&cm_mmc=shp-_-c-_-prd-_-hdw-_-bng-_-PMAX_HDW_000_Priority_Item-_-5014522869-_-Online-_-0-_-0&gclid=0499a91492bc1dcf9f42c006a73d485f&gclsrc=3p.ds&msclkid=0499a91492bc1dcf9f42c006a73d485f&utm_source=bing&utm_medium=cpc&utm_campaign=PMAX_HDW_000_Priority_Item&utm_term=2333438552476692&utm_content=PMAX_HDW_Decorative-Hardware_Video



3. Line Bore Interiors

4. Grommet ( suggested style )

Cable Grommet, Two-Piece, Round, Ø2 1/2" - Häfele
https://www.hafele.com/us/en/product/cable-grommet-two-piece-round-2-1-2-/63126311/?MasterSKU=P-00868061





5. Integral Toe ( suggested style )

6. DW PANEL Ready ( suggested style )

Wood 7981 Willsonart





7. DW PANEL Ready ( suggested style ) Possible suggestion.

Regular Wood Shelf Bracket | Shelf Brackets | Original Granite Bracket - The Original Granite Bracket
https://originalgranitebracket.com/collections/all-brackets/products/new-wood-shelf-bracket?variant=32802876686433




7. Support Metal ( suggested style )
The Original  Bridge Bracket

Floating Countertop Brackets | The Original Bridge Bracket - The Original Granite Bracket
https://originalgranitebracket.com/collections/all-brackets/products/the-original-bridge-bracket

8. Logos( suggested style )

mall etched, vinyl, or laser-engraved icons



9. Cutout, Sink ( suggested style )


Undermount Stainless / Undermount Porcelain


9. Drawer Bumper ( suggested style )



Amazon.com: Cabinet Door Bumpers Pack of 200 Self Adhesive Bumpers Pads, Sound Dampening Circular Dots Cupboard Bumpers Clear, Soft Rubber for Drawers, Table Tops, Laptop : Tools & Home Improvement






9. Shel Pins ( suggested style )

5mm Clear Plastic Shelf Pins










































NOTE: don't bulk the research 21, e.g. split batch 10 and 11.  GPT





EXPERIMENTAL REPORT


Got it — here is one clean list, #1–#21, each with a single URL.
If no true “sample” exists (fabrication-only / shop-built items), it is marked NA.

---

RADD Hardware Sample List (with URLs)

1. Pull Bar
   https://www.ravinte.com/products
   
   

2. Full Extension Slides (Blum Tandem / Blumotion)
   https://www.blum.com/us/en/products/runners/tandem/overview/
   
   

3. Line Bore Interiors (System 32 shelf / boring system – reference standard only)
   NA
   
   

4. Grommet (Worksurface Cable Pass-Through)
   https://www.hafele.com/us/en/products/furniture-grommets/37861379/
   
   

5. Integral Toe (Integral Toe-Kick Millwork Detail)
   NA
   
   

6. DW Panel Ready (Dishwasher Panel Hardware Reference)
   https://www.bosch-home.com/us/productslist/dishwashers/panel-ready
   
   

7. Support, Metal Inwall (Countertop / Millwork Steel Support Bracket)
   https://www.federalbrace.com/Countertop-Support-Brackets
   
   

8. Support, Metal (Surface / Shelf / Bar Support Bracket)
   https://www.fastcap.com/product/stealth-bracket
   
   

9. Logos, Trash / Recycle Decals
   https://www.behrenbergdesign.com/collections/recycle-stickers
   
   

10. Cut Out, Sink (Fabrication Detail – No sample)
    NA
    
    

11. Cut Out, Sink Polished Edge (Fabrication Edge Spec – No sample)
    NA
    
    

12. Fry Reglet (Profiles / Reveal Base / Millwork Trim request samples)
    https://fryreglet.com/request-samples/
    
    

13. Die Wall (Millwork Die Wall / Built Condition)
    NA
    
    

14. Rib with Wire Chase (Custom Millwork Rib System)
    NA
    
    

15. Metal Inwall (In-Wall Blocking Plate / Hidden Steel Support)
    https://www.federalbrace.com/In-Wall-Bracket-Systems
    
    

16. Sub Top (Substrate for Countertops – Fabrication Only)
    NA
    
    

17. Adjustable Shelf (System Rails / Shelf Standards)
    https://www.hafele.com/us/en/products/shelf-supports/37665344/
    
    

18. Concealed Hinges (Soft-Close) – Blum CLIP Top BLUMOTION
    https://www.blum.com/us/en/products/hinges/clip-top-blumotion/overview/
    
    

19. Shelf Pins (Finish Selection)
    https://www.hafele.com/us/en/products/shelf-supports/shelf-pins/37665355/
    
    

20. Trash / Recycle Pull-Out System (Mechanism + Bins)
    https://rev-a-shelf.com/waste-and-recycling-systems
    
    

21. Door / Drawer Bumpers
    https://www.3m.com/3M/en_US/p/dc/v000057726/